Skip to content
Quote + Calibration Cert

Primary Service

CMM Calibration and Repair

Request a quote for verification, adjustment or repair.

Request a quotation

StandardISO/IEC 17025:2017CoverageMissouri and the Greater Midwest

A written quotation is returned by email.

What a visit covers

The X, Y and Z scales are inspected and cleaned first, followed by a reader head check and an inspection of air bearings and airline condition. Geometry is checked next: straightness, linearity and squareness in the XY, ZX and ZY planes.

Length measurement error is then tested per ISO 10360-2, five calibrated lengths measured three times each across seven positions, 105 measurements in total. Probing error is tested separately per ISO 10360-5 against a dedicated test sphere.

Calibration versus repair

Some faults are corrected by geometric adjustment and a controller compensation update. Others are a parts-and-labor repair before the machine can pass verification at all.

  • 01

    Scale and reader head

    Glass or steel scales and reader heads are cleaned, checked with an oscilloscope, and replaced when output is unstable.

  • 02

    Air bearings and drives

    Air bearing clearance and airline supply are inspected; worn bearings and drive components are quoted as repair items.

  • 03

    Probe and probe head

    Probe heads, styli and qualification routines are checked where probing error exceeds PFTU limits.

  • 04

    Error map and compensation

    The volumetric compensation map is updated where the controller allows access; some controllers are OEM-locked.

  • 05

    Crash recovery and relocation

    Machines moved or crashed are re-verified against the full geometry and length measurement error test before return to service.

Sequence of a visit

  • 01

    Thermal soak

    Artifacts and the machine are allowed to stabilize to room temperature before testing begins.

  • 02

    As-found test

    Geometry and length measurement error are recorded at as-found condition, before any adjustment.

  • 03

    Adjustment

    Geometric compensation and, where accessible, the volumetric error map are updated.

  • 04

    As-left verification

    The full test sequence is repeated and results are issued on the certificate.

Why Kansas City CMM Calibration and Repair

  • 01

    Artifacts matched to test

    Gauge blocks, step gauges, ball bars and test spheres are selected to the length and tolerance being verified.

  • 02

    Out-of-tolerance reported, not hidden

    As-found failures are reported with enough detail to run a reverse-traceability impact assessment.

  • 03

    Repair quoted separately

    Adjustment within specification and a parts repair are two different line items, quoted as such.

Coverage across Missouri and the Greater Midwest

On-site scheduling is organized by region. Travel time and routing affect the date offered, particularly outside the Kansas City metro.

Discuss CMM Calibration and Repair Requirements

Describe the machine and the standard required.

A written quotation is returned by email.
Quote + Calibration CertEmail us